| |
     |
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
 |
ST-1 Series
For External Halyard Poles • Cap Style • Stationary • Single Pulley Cast aluminum construction with a 1" outside diameter cast nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one ¼" - 20NC stainless steel set screw. The top of the truck is designed to accept an ornament with a spindle threading of ½" - 13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. The recommended maximum halyard diameter is ¼". |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| ST-1-38 | 1 3/8" | E340000 | $18.00 | E340005 | $20.00 | E340010 | $20.00 | E340015 | $20.00 |
| ST-1-12 | 1 ½" | E340001 | 18.00 | E340006 | 20.00 | E340011 | 20.00 | E340016 | 20.00 |
| ST-1-34 | 1 ¾" | E340002 | 18.00 | E340007 | 20.00 | E340012 | 20.00 | E340017 | 20.00 |
| ST-1-16 | 1 15/16" | E340003 | 18.00 | E340008 | 20.00 | E340013 | 20.00 | E340018 | 20.00 |
| ST-1-20 | 2" | E340004 | 18.00 | E340009 | 20.00 | E340014 | 20.00 | E340019 | 20.00 |
 |
ST-32 Series Cast aluminum construction with a 1 7/16" outside diameter cast nylon pulley on a ¼" stainless steel axle. Designed to slip over the top of the flagpole and be secured with three 5/16" - 18NC stainless steel set screws. The top of the truck is designed to accept an ornament with a spindle threading of ½" - 13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a ¼" - 20NC stainless set screw. The recommended maximum halyard diameter is 5/16". |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| ST-3 | 1 7/8" | E340040 | $35.00 | E340042 | $39.00 | E340044 | $39.00 | E340046 | $39.00 |
| ST-2 | 2 3/8" | E340041 | 35.00 | E340043 | 39.00 | E340045 | 39.00 | E340047 | 39.00 |
 |
OT Series
Cast aluminum construction with cast nylon pulley (1 7/16" outside diameter on OTH, OT1 and OT25; 2" outside diameter on OT2, OT3, and OT35) on a ¼" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one ¼" - 20NC on the OTH; three 5/16" - 18NC on the OT1, OT2, OT25, OT3 and OT35). the top of the truck is designed to accept an ornament with a spindle threading of ½" - 13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. The recommended maximum halyard diameter is 5/16". |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| OTH | 2" | E340056 | $18.00 | E340062 | $20.00 | E340068 | $20.00 | E340074 | $20.00 |
| OT1 | 2 3/8" | E340057 | 25.00 | E340063 | 28.00 | E340069 | 28.00 | E340075 | 28.00 |
| OT25 | 2 ½" | E340058 | 29.00 | E340064 | 32.00 | E340070 | 32.00 | E340076 | 32.00 |
| OT2 | 2 ¾" | E340059 | 29.00 | E340065 | 32.00 | E340071 | 32.00 | E340077 | 32.00 |
| OT3 | 3" | E340060 | 29.00 | E340066 | 32.00 | E340072 | 32.00 | E340078 | 32.00 |
| OT35 | 3 ½" | E340061 | 34.00 | E340067 | 37.00 | E340073 | 37.00 | E340079 | 37.00 |
 |
RTC-1 Series Cast aluminum construction with a 2" diameter cast nylon pulley on a ¼" stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (¼" - 20NC on the RTC-1-2 & 5/16" - 18NC on the RTC-1-238). The top of the spindle is designed to accept an ornament with a spindle threading of ½" - 13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
|
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| RTC-1-2 | 2" | E340104 | $61.00 | E340106 | $68.00 | E340108 | $68.00 | E340110 | $68.00 |
| RTC-1-238 | 2 3/8" | E340105 | 61.00 | E340107 | 68.00 | E340109 | 68.00 | E340111 | 68.00 |
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
 |
RTC-2 Series
Cast aluminum construction with a 2" outside diameter cast nylon pulleys on ¼" stainless steel axles. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (¼"-20NC on The RTC-1-2 & 5/16"-18NC on The RTC-1-238). The top of the spindle is designed to accept a ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
|
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| RTC-2-2 | 2" | E340120 | $59.00 | E340122 | $66.00 | E340124 | $66.00 | E340126 | $66.00 |
| RTC-2-238 | 2 3/8" | E340121 | 61.00 | E340123 | $68.00 | E340125 | $68.00 | E340127 | 68.00 |
 |
RTS-1 Series
Cast aluminum construction with a 2" outside diameter cast nylon pulley on a ¼" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 ½" outside top diameter with female fitting installed. The bottom of the spindle has a 1 ¼" NPT threading and is screwed into The top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
|
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| RTS-1-125 | 3 ½" | E340136 | $47.00 | E340137 | $51.00 | E340138 | $51.00 | E340139 | $51.00 |
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
 |
RTS-2 Series
Cast aluminum construction with 2" outside diameter cast nylon pulleys on ¼" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with female fitting installed. The bottom of the spindle has a 1 ¼" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
|
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| RTS-2-125 | 4" | E340144 | $51.00 | E340145 | $55.00 | E340146 | $55.00 | E340147 | $55.00 |
 |
Heavy-Duty Series
Cast aluminum construction with a 3 7/8" outside diameter aluminum pulleys on ½" stainless steel axles. This truck is designed to be used on flagpoles that have up a 5 ½" outside top diameter with female fitting installed. The bottom of the spindle has a 1 ¼" NPT threading and is screwed into The top of the flagpole while The top spindle is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to The truck with a ¼"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".
|
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| HDT | 5 ½" | E340152 | $116.00 | E340153 | $126.00 | E340154 | $126.00 | E340155 | $126.00 |
 |
Extra Heavy-Duty Series Cast aluminum construction with 3 7/8" outside diameter aluminum pulleys on ½" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12 ¾" outside top diameter with female fitting installed. The bottom of the spindle has a 1 ¼" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The recommended maximum halyard diameter is 3/8".
|
| Model | Spindle Material | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| XHDT | Aluminum | E340160 | $473.00 | E340162 | $504.00 | E340164 | $504.00 | E340166 | $504.00 |
| XHDT-SS | Stainless Steel | E340161 | 893.00 | E340163 | 924.00 | E340165 | 924.00 | E340167 | 924.00 |
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
 |
BA Series
Cast bronze alloy construction with 2" outside diameter cast nylon pulleys on ¼" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with female fitting installed. The bottom of the spindle has 1 ¼" NPT threading and is screwed into the top of the flagpole while The top of the spindle is designed to accept an ornament with threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the top of the truck with a ¼"-20NC stainless steel set screw. For additional ease of rotation, product life and strength, This truck utilizes stainless steel self-lubricating ball bearing assemblies. Recommended maximum rope diameter is 5/16". |
| Model | Fits Pole Diameter | Item # | Price |
| RTSB | 4" | E340168 | $200.00 |
 |
150 Series
Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with female fitting installed. The bottom of the spindle has a 1 ½" NPT threading and is screwed into the top of the flagpole while The top spindle is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a ¼"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 5/16". |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| RTS-2-150 | 4" | E340170 | $91.00 | E340171 | $99.00 | E340172 | $99.00 | E340173 | $99.00 |
 |
IH-1 Series
Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a ¼" stainless steel axle and is held in place inside the truck by a 5/16"-18NC stainless steel set screw. the truck has a 2" outside diameter cast nylon pulley on a ¼" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top of the truck will accept an ornament with ½"-13NC threading as standard but can be supplied with other sizes of threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. Recommended maximum diameter is 5/16". |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| IH-1-3 | 3" | E340178 | $40.00 | E340180 | $45.00 | E340182 | $45.00 | E340184 | $45.00 |
| IH-1-35 | 3 ½" | E340179 | 55.00 | E340181 | 61.00 | E340183 | 61.00 | E340185 | 61.00 |
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
 |
IH-2 Series All of these cast aluminum trucks have a 1 ¼" NPT threaded spindle which screws into the top of the flagpole where a female fitting has been installed. the top of all trucks are designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied in other sizes of threading. The ornament is secured to the truck with a size ¼"-20NC stainless steel set screw. The extra large model has a stainless steel sealed lubricant bearing assembly while all other sizes utilize stainless steel ball bearings in both the upper & lower bearing races. All sizes except the small model are supplied with a bonze bushing at the cable exit point. For added strength the extra large truck is supplied with a cast bronze spindle; all other sizes are supplied with a cast aluminum spindle. |
| Model | Base Dia. of Truck | Height of Truck | Max. Pole Top DIA. | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||||
| IHT-V | 5" | 4 ½" | 3" | E340194 | $137.00 | E340198 | $150.00 | E340202 | $150.00 | E340206 | $150.00 |
| IHT-1 | 6 ½" | 6 ½" | 4" | E340195 | 210.00 | E340199 | 231.00 | E340203 | 231.00 | E340207 | 231.00 |
| IHT-2 | 8" | 7 ¼" | 5" | E340196 | 252.00 | E340200 | 277.00 | E340204 | 277.00 | E340208 | 277.00 |
| IHT-3 | 10 ½" | 8 ½" | 7 ½" | E340197 | 515.00 | E340201 | 557.00 | E340205 | 557.00 | E340209 | 557.00 |
 |
Fiberglass-1 Series
Molded fiberglass construction with ¾" outside diameter nylon pulley on 3/16" stainless steel axle. The stem of the truck is designed to slip in to a 2" inside diameter pole top and is held in place by drilling through the pole and securing the truck to the pole with an appropriate size bolt or screw (not included). The top of the truck is designed to accept an ornament with a spindle threading of ½"-13NC. The maximum halyard size is ¼".
|
||||||||||||
 |
Fiberglass-2 Series
Molded fiberglass construction with 1 ½" outside diameter cast nylon pulleys on ¼" stainless steel axles. The top of the truck is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be supplied with other sizes of threading if desired. The aluminum spindle is threaded 1 ¼" NPT. The recommended maximum halyard diameter is 5/16".
|
||||||||||||
 |
Fiberglass-IH Series
Molded fiberglass construction with a 1 ½" outside diameter cast nylon pulley. This stationary truck is designed to be used on flagpoles that have up to a 3 ¼" outside top diameter with female fitting installed. The spindle has 1 ¼" NPT threading and is screwed into the top of the flagpole. The spindle is hollow allowing the halyard to feed from inside the flagpole. The top of the truck will accept an ornament with ½"-13NC threading as standard but can be supplied with other sizes of threading. Recommended maximum rope diameter is 5/16".
|
||||||||||||
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
|
Pulley & Eyebolt Assemblies Includes Hex Nut, Washer & Lock Washer |
|
| Deluxe | Standard |
| Model | Item # | Overall Length | Thread Length | Threading | Bolt Material | Pulley Housing Material | Pulley Material | Max. Rope Diameter | Price |
| Deluxe | E340236 | 4 1/8" | 2 3/8" | 5/16"-18NC | Stainless Steel | Stainless Steel | Nylon | 5/16" | $10.00 |
| Standard | E340237 | 3 1/8" | 1" | #8-32NC | Zinc Plated Steel | Zinc | Zinc | 3/16" | 3.00 |
 |
Pole Top Adapters |
|
These adapters are used in mounting a truck that has a spindle threading of 1¼" NPT and the pole does not have a threaded top plug installed. The adapter is tapped 1¼" NPT and is designed to slip over the top of the pole and is secured by three ¼"-20NC stainless steel set screws. |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| PTA-238 | 2 3/8" | E340238 | $38.00 | E340247 | $42.00 | E340256 | $42.00 | E340265 | $42.00 |
| PTA-212 | 2 ½" | E340239 | 38.00 | E340248 | 42.00 | E340257 | 42.00 | E340266 | 42.00 |
| PTA-3 | 3" | E340240 | 53.00 | E340249 | 58.00 | E340258 | 58.00 | E340267 | 58.00 |
| PTA-312 | 3 ½" | E340241 | 53.00 | E340250 | 58.00 | E340259 | 58.00 | E340268 | 58.00 |
| PTA-4 | 4" | E340242 | 63.00 | E340251 | 69.00 | E340260 | 69.00 | E340269 | 69.00 |
| PTA-412 | 4 ½" | E340243 | 63.00 | E340252 | 69.00 | E340261 | 69.00 | E340270 | 69.00 |
| PTA-5 | 5" | E340244 | 63.00 | E340253 | 69.00 | E340262 | 69.00 | E340271 | 69.00 |
| PTA-512 | 5 ½" | E340245 | 84.00 | E340254 | 92.00 | E340263 | 92.00 | E340272 | 92.00 |
| PTA-6 | 6" | E340246 | 84.00 | E340255 | 92.00 | E340264 | 92.00 | E340273 | 92.00 |
 |
Flagpole Caps Cast aluminum construction designed to slip over the top of the flagpole and be secured with three ¼"-20NC stainless steel set screws. The top of the cap is designed to accept an ornament with a spindle threading of ½"-13NC as standard but can be equipped with other sizes of threading or no threading. |
| Model | Fits Pole Diameter | Silver | Bronze #313 | White | Black | ||||
| Item # | Price | Item # | Price | Item # | Price | Item # | Price | ||
| FC-20 | 2" | E340274 | $13.00 | E340276 | $15.00 | E340278 | $15.00 | E340280 | $15.00 |
| FC-212 | 2 ½" | E340275 | 15.00 | E340277 | 17.00 | E340279 | 17.00 | E340281 | 17.00 |
|
Vertical Mount Pulley Assemblies
Cast aluminum construction with a 1 7/16" outside
diameter cast nylon pulley on a ¼" stainless steel axle.
Attaches with two ¼"-20NC stainless steel flathead screws
(included) or two stainless steel straps (not included). |
|
Threaded Top Plugs Screws into top of pole with 1 ¼" NPT threading
|
|
|
|
|
Rope Pulleys
|
| Click Item
Number To Add To Cart Note: You Can Remove It Later! |
Copyright ©1997- 2005 American Flag and Gift, All Rights Reserved
